Rjs Inspector D4000 SP (FIRMWARE version A.06 and Late Manuel d'utilisateur télécharger pdf (Page 24)

Inspector D4000™ Laser SP Operator’s Guide

RJS, Minneapolis, MN 002-5572

5.3 Storage

Storage will display as either Storage Inactive or

Storage % depending on whether Store and Print is

enabled or disabled.

 When Store and Print is enabled, a number and a

percentage sign 00% to 99% will display.

 When Store and Print is disabled, Storage Inac-

tive will display.

Scan Setup

Storage Inactive

D4000L Ver.x.xx

“Inactive” displays when Store and Print is inactive.

Scan Setup

Storage XX%

D4000L Ver.x.xx

A storage “%” displays when Store and Print is active.

If a % is displayed, it represents the percentage of the

buffer that is filled with scan data.

You may enable or disable Store and Print by pressing

Enter with the cursor on Storage.

(Toggle from one option to the other)

When Storage is active, press Select to move the

cursor to the % sign. Press Enter on the % sign to

clear the Store and Print buffer.

(See Appendix H, Print Functions)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 76 77

Pas de commentaire

Rjs Inspector D4000 SP (FIRMWARE version A.06 and Late Manuel d'utilisateur Page 24